29.90 €/piece BUY

Colltex Warming Scraper 100W

A warming scraper designed for cleaning self-adhesive ski skins and for preparing to apply a new coating of adhesive. Including spatula tool head with 1.3 m electric cable with EURO plug and metallic stand.

Nominal voltage: 230 V
Power consumption: 100 W

Instructional video on old glue removal

Recoating_with_Colltex_hotmelt_adhesive_EN_06 from Colltex on Vimeo.

Use the “hotmelt adhesive” from the tube for partial or complete renewal of the hotmelt adhesive layer. Apply it at room temperature. Fix the ski skin to a table and clean it as well as possible. The best way to do so is with a soldering iron with spatula. Press the hotmelt adhesive directly from the tube onto the ski skin and distribute it regularly over the entire adhesive layer using a spatula. Tip: distribution is best achieved with a roller. Allow the adhesive to dry for at least 6-8 hours. Protect the new hotmelt adhesive layer with protective netting and stow the ski skin in the bag intended for this purpose.

Please Note! Does not apply for Colltex CT40 ski skins.

piece
Only 3 pieces left in stock, after the stock is empty this product is not available.
Share on Facebook Share on Twitter