Stormsure Watersports Repair Kit in Box

A kit for repairing water sports equipment.

This set contains:
• 1x 5g tube of Stormsure Flexible Repair Adhesive
• 2x TUFF Tape patches. 75mm diameter.
• 1x TUFF Tape strip. 15cm long x 7.5cm wide
• 1x Disposable Gloves
• 1x Spatula

Stormsure Flexible Repair Adhesive, is a waterproof universal glue. It is highly versatile in all areas but is particularly useful in repairs to outdoor-wear and water sports equipment due to being flexible and extremely tough when cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in wellington boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and much more.

An essential piece of kit for hikers, fishermen, equestrians, hunters, divers, campers, surfers, sailors etc!

DIRECTIONS
Using at room temperature. Clean the damaged area (sand the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, leaving at least a 5mm excess around it. Leave flat and allow to cure for 10-12 hours.

TIPS
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.

The set includes disposable gloves and three tubes of glue.

Stormsure's TUFF Tape is a self-adhesive, transparent, highly conformable repair tape. It is excellent for repairs on generally flat surfaces such as on soft top car roofs, tents, bivvies, marquees, ripped fabric, inflatable boats, inflatable pools and toys, canopies, awnings and more.

TUFF Tape is perfect for fast, easy and long-lasting repairs due to being highly multi-purpose, almost impossible to tear, abrasion resistant and comfortable against skin. We advise every outdoor enthusiast to keep TUFF Tape handy on camping, hiking or water sports trips.

DIRECTIONS
• Ensure that the surface is clean before using.
• Peel off backing paper and apply TUFF Tape directly on top of the damage, keeping it as flat as possible.
• Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Application information or instructions of use are not included with the by the meter tape.

Material: Thermoplastic Polyurethane (flexible and easy to use)
Thickness: 0.2 mm
Width: 75 mm
Weight:n. 14 g/m (180 g/m²)

NOT SUITABLE FOR: silicone covered fabrics, long term UV exposure (sunlight)